FREE SHIPPING ON ORDERS OVER $99
logo
A cartoon drawing of a bottle that says ' lidar ' on it
CONTACT US
A red ruler with the numbers 7 8 9 10 11 12 13 on it
Stake Out Aid foldable with reflective target

$47.00

RS95 RS96 and RS97Stake Out Aid with reflective targets and ruling lines foldable with- reflective target + ruling lines RS96- non-reflective target + ruling lines RS97Stake out aids RS95 and RS96 were developed specifically for setting out work on the batter boards and on the floor slab. Exact measuring of the survey point on the floor slab often causes major problems particularly in the ���final phase��� with the last 5-10 cm. The work is very time-consuming due to the continual side to side, backwards and forwards with the prism pole and the prism pole always has to be exactly plumb. Setting out aid RS95 or foldable setting out aid RS96 is placed on the ground and the assistant can use the measuring scales to reproduce and transfer the surveyor���s directions quickly and precisely. Makes surveying the axes on the batter boards easier For allowances on the floor slab ��� the last 5-10 cm especially can be measured quickly and precisely The surveyor���s dimensional data to the floor slab There is no need for precise plumbing of the prism pole Orientation scale for left and right - the number 10 corresponds to the axis Orientation scales for backwards and forwards Foldable: fits in any shirt pocket (only RS96 + RS97) RS95, RS96: The ranges are dependent on the device and can be adversely affected by weather and environmental conditions.The following heights must be taken into account for the measurements:RS95: From the crosshairs of the reflective target to the floor slab 30 mmRS96: From the crosshairs of the reflective target to the floor slab 20 mmRS97: From the crosshairs of the non reflective target to the floor slab 20 mm

You may also like

Share by: