Non-Reflective Target 20 x 20 mm

Reflective Targets 30 x 30 mm

Reflective and non-reflective target which can be rotated through 360� and tilted + magnetic!

Can be quickly and easily stuck even to difficult surfaces, e.g. glass and marble fa�ades, historic buildings, steel girders, gas and oil pipelines, etc. or can be fixed using plugs and screws. The base plates are also available in a magnetic design for easy fixing to steel fabrications. The following accessories are offered for both products (see right):

Fixed point (Item RSFP-X90) for magnetic version

Protective cap with or without magnetism (RSPC20 and RSPC20M)

The non-reflective target marks RS192M

are used for positioning the following devices:

Leica 3D Disto

Geomax Zoom 3D

Flexijet 3D

With the magnetic target RS192M you can, in addition, use the fixed point RSFP-X90.

The reflective targets RS193 and RS193M

When using tachometers and robotic total stations

the reflective target can always be aligned accurately with the measuring instrument

the reflective target can be turned in a radius of 360� making it possible to use the same survey point from all directions

when using the fixed point RSFP-X90, the targets can be removed and later replaced on the same survey point

when using the protective cap RSPC20 and RSPC20M, the reflective targets can be protected against dirt

Range approx. 80 meters

offset: 0

Tilting axis height: 45 mm The ranges are dependent on the device and can be adversely affected

by weather and environmental conditions.

<iframe width="560" height="315" src="https://www.youtube.com/embed/MtNcjtZ7vQY?si=VhzRew2h4ZFGTZEZ" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share" referrerpolicy="strict-origin-when-cross-origin" allowfullscreen></iframe>