Introducing our versatile target options: RS192M*, RS193, and RS193M* (*magnetic).

Our Non-Reflective Targets measure 20 x 20 mm, while the Reflective Targets come in at 30 x 30 mm. These targets offer both reflective and non-reflective functions and can be effortlessly rotated a full 360 degrees and tilted, with the added benefit of magnetic capability! They can be swiftly attached to even the most challenging surfaces, such as glass, marble façades, historic architecture, steel girders, and gas and oil pipelines. Alternatively, they can be securely installed using plugs and screws. Additionally, we offer magnetic base plates for easy attachment to steel constructions.

The following accessories are available for both product lines (see right):

- Fixed point (Item RSFP-X90) for the magnetic version

- Protective cap with or without a magnet (RSPC20 and RSPC20M)

The non-reflective targets, RS192M, are perfect for positioning devices like the Leica 3D Disto, Geomax Zoom 3D, and Flexijet 3D. With the magnetic RS192M target, you can also utilize the fixed point RSFP-X90.

For the reflective targets, RS193 and RS193M, when paired with tachometers and robotic total stations, the reflective targets can be adjusted and aligned effortlessly with the measuring instrument. The targets can be rotated 360 degrees, allowing for usage from all angles at the same survey point. With the fixed point RSFP-X90, you can remove the targets and later reattach them at the same site. To keep the reflective targets clean, the protective caps RSPC20 and RSPC20M provide added protection against dirt.

The effective range is approximately 80 meters with an offset of 0. The tilting axis height is 45 mm. Please note that these ranges are dependent on the specific device and may be impacted by weather and environmental conditions. For optimal performance, we recommend the magnetic version (RS193M), which also accommodates the fixed point RSFP-X90.