Are you looking to optimize your FARO Focus scanner for overhead scanning? This overhead scanning adapter offers unparalleled protection for your valuable measuring equipment. Attaching the adapter to both the tripod and the scanner is a breeze. One of the key benefits of this adapter is its user-friendly design, making it simple to secure the scanner above ducts and similar structures. Just slide the scanner into the adapter and lock it in place—it's that easy and secure.

Designed for the FARO Focus S, M, Focus Premium, and Focus Core, this overhead adapter is an evolution of the previous model. It has been specifically tailored to fit the new generation of base plates for FARO Focus scanners. The adapter is directly fastened to the base plate using a 3/8" star knob screw, while the three built-in pins lock into existing recesses on the base plate, preventing the scanner from loosening during the scanning procedure.

**Intended Use:** Safe overhead scanning

**Product Characteristics:**

- The adapter plate is securely attached to the original base plate of the scanner. Note that the pins only fit into one specific position, so be sure to check the connection thoroughly before scanning!

- The adapter's slot connects to a tripod with a 5/8" fitting.

- The scanner, along with the adapter plate, can be effortlessly secured into the tripod's complement.

- A lateral safety screw is tightened before scanning, effectively eliminating any play between the two adapter sections.

- **Thread Size:** 5/8" male thread

- **Dimensions:** 10cm x 10cm x 10cm (3.94 in x 3.94 in x 3.94 in)

- **Weight:** 1kg

**Compatible Laser Scanners:**

- FARO Focus Premium

- FARO Focus Core

- FARO Focus S 70

- FARO Focus S 150

- FARO Focus S 150 Plus

- FARO Focus S 350

- FARO Focus S 350 Plus

- FARO Focus M 70

**Delivery Includes:**

- 1 overhead adapter, comprised of a plate (for scanner attachment) and a slot (for tripod attachment).

**Notes:**

- The adapter’s pins only fit into the recesses of the base plate in one specific manner, so verify that the adapter is properly positioned before scanning (the gap between the base plate and the adapter should be parallel!).

- We advise marking the correct position the first time you use the adapter.

- The overhead adapter is only partially compatible with earlier FARO models (Focus3D X130, X330, S30, S120). While the 3/8" screw can be used with these older models, there are no locking mechanisms to prevent the screw from loosening during use, so we do not recommend using the adapter with those scanner types.

**Synonyms:** 3D safety adapter